1. Water-based off-road paint.
Photoluminescent enamel based on aqueous emulsion of pure acrylic resins. Matte finish. For indoor and outdoor use. Odorless, waterproof, flexible, easy to apply and quick to dry. Apply directly to light or white surfaces.
Related documents:
Data sheet.
Safety sheet: green and blue.
Application sheet.
2. Solvent-based paint: multi-surface, single-component.
Single component paint ideal for metal, glass, wood, concrete, parking lots and roads. Quick drying, high resistance to abrasion and alkalinity. Apply directly to light or white surfaces. We have white primer. Fluorine colors are for interiors, as they degrade in sunlight.
Related documents:
Data sheet.
Security file.
Application sheet.
3. Polyurethane paint: Professional, high resistance for floors.
Dual component paint ideal for interior-exterior. High resistance to road traffic. Fast dry. The polyurethane paint is an alkyd enamel with a high-quality finish, characterized by its easy application by brush or spatula, as well as its excellent resistance properties and optimal maintenance of shine outdoors. They also highlight its great hardness, flexibility and resistance to wear. Quick hardening. Apply directly to light or white surfaces.
Related documents:
Data sheet.
Security file.
Application sheet.
4. Smooth photoluminescent tape.
Ideal for marking the contour of evacuation doors, also to be placed on the sides of walls and stairs (usually about 10 cm from the ground) showing the evacuation route in the absence of light (when there is smoke, people crouch and They don't see the signs. We can screen print direction arrows, sergeants, red or black danger bars...
5. Abrasive anti-slip photoluminescent tape.
Its mission is to prevent slipping on those surfaces where, due to their physical characteristics, there is a risk of slipping and falling, providing complete safety with and without light thanks to its photoluminescence. Widely used on stairs. It has a built-in double-sided adhesive film.
6. Non-abrasive non-slip photoluminescent tape.
The mission is the same as that of the non-slip tape in the previous point, with the peculiarity that it is not abrasive and can be walked on barefoot. Ideal to apply, for example, on the floor of locker rooms, boats... It has a double-sided adhesive film incorporated.
7. Circles with an evacuation arrow.
The mission is to mark the path of the evacuation route in the dark. Its non-slip film ensures that we avoid the risks of falls. They are made of aluminum, therefore, they are highly durable. Normally they are installed in the center of the corridors every 2 meters, also on the stairs, on each landing of steps. They have built-in double-sided adhesive film.
8. Thermoplastic tablets.
Special product for flat surfaces. It can be applied to any type of surface that can be heated without deterioration.
It is a pre-cut thermo-hardening plastic, with embedded luminescent quartz, thus achieving luminescence and anti-slip. It is applied with a heat torch (the soil is heated with a torch, the tablet/arrow is applied on top and it is heated again, fixing it by heat to the base substrate). Resistant to high traffic conditions.
Related documents:
Data sheet.
Security file.
Application sheet.
9. Non-slip photoluminescent profile.
Ideal for curbs and stairs, thus avoiding slipping and increasing safety. Our profiles make the step more visible, even in the total absence of light, by marking its limit.
Related documents:
Data sheet.
10. Printable photoluminescent vinyl.
Flexible PVC photoluminescent vinyl. It can be used in different applications: printed by screen printing or with printing machines (plotter) for the manufacture of luminescent safety signs, advertising items, plans, logos... It is supplied in 1 class A (high power) and 2 class B of 100 and 150 millicandelas after 10 minutes (the standard contemplates that class B must have a minimum of 40 mcd).
Related documents:
Technical sheet: Class A, Class B+ and Class B-.
Security file.
Light measurement: Class A, Class B+ and Class B-.
11. Photoluminescent PVC plates.
Plate made up of a laminar piece of synthetic resin, composed of a luminescent part on a white pigmented base that allows maximum use of light reflection, in PVC thermoplastic material. It is supplied in class A (high power) and class B of 150 millicandelas after 10 minutes (the standard contemplates that class B must have a minimum of 40 mcd).
Related documents:
Data sheet.
Security file.
Light measurement.
12. Photoluminescent inks.
Professional solvent-drying and U.V. inks. intended for printing paper, cardboard, PVC's, self-adhesive, methacrylate, polystyrene, polycarbonate and aluminum.
Related documents:
Solvent-based technical sheet: Class A and Class B.
UV base data sheet: Class A and Class B.
Solvent-based safety data sheet.
UV based safety sheet.
*Extended information in the PDF and related documents*